Klein 4000 Series Operation And Maintenance Manual page 62

4-10
CHAPTER 4 Equipment Maintenance
Slide the nose cone into the
11.
towfish housing, aligning
the locator pin on the nose
cone with the slot in the
housing and threading the
nose cone retaining bolt
into the forward end cap as
shown in Figure 4-14.
Tighten the nose cone
12.
retaining bolt.
Series 4000 Sonar System Operations and Maintenance Manual
Aligning the Locking Screws
Figure 4-13:
before Inserting the Forward End Cap
Aligning the Locator Pin in the
Figure 4-14:
Nose Cone with the Slot in the Towfish Housing
Slot
Locator pin
P/N 11210094, Rev. 01