Figure 4-2: Removing The Tail Cone - Klein 4000 Series Operation And Maintenance Manual

4-4
CHAPTER 4 Equipment Maintenance
Pull the tail cone away
4.
from the towfish housing,
and then reach inside the
housing and disconnect the
jumper and compass
cables.
Set the tail cone aside, and
5.
then remove the tail cone
retaining bolt which is
shown in Figure 4-3.
Series 4000 Sonar System Operations and Maintenance Manual
Jumper cable
Compass
cable
Removing the Tail Cone
Figure 4-2:
Tail Cone Removed from the
Figure 4-3:
Towfish Housing
Tail cone
retaining bolt
P/N 11210094, Rev. 01