Chapter 3: Setup And Test; Unpacking And Inspection - Klein 4000 Series Operation And Maintenance Manual

Table of Contents

CHAPTER 3: S

This chapter provides instructions for unpacking the Series 4000 Sonar System,

connecting its components and a navigation system, and testing the system both on

deck and at sea. Descriptions of all the connections and the controls and indicators

for all the system components are also included.

3.1

The towfish and the topside system components, including associated cables and

documentation, are shipped in multiple shipping cases. Unpack all of the cases and

verify that all of the items listed on the packing list have been received. If any

items are damaged or missing, immediately contact Klein Marine Systems, Inc. or

your KMS sales representative. In addition, record the serial numbers for the

towfish, the TPU or SP-III TPU, and the SonarPro Workstation or laptop. The

towfish serial number can be found on the towfish tow bracket. Refer to Figure 1-1

on page 1-3 for the location of the tow bracket. The serial numbers for the TPU or

SP-III TPU and the SonarPro Workstation or laptop can be found on the rear panel

of each. The Series 4000 Sonar System typically includes the following items:

• Towfish

• TPU or SP-III TPU

• SonarPro Workstation or laptop

• Lightweight tow cable

• Cable kit

• Accessory tool kit

• Safety cable

• Cable kit, typically containing:

AC power cable

DC power cable (with SP-III TPU only)

Ethernet crossover cable

• DVD with manuals and software

ETUP AND

EST

3-1

Table of Contents