Querying Or Changing The Tpu/Sp-Iii Tpu Ip Address; Figure B-2: The Select Rs-232 Port Dialog Box - Klein 4000 Series Operation And Maintenance Manual

B-2
APPENDIX B Configuring and Updating the TPU/SP-III TPU
B.2 Querying or Changing the TPU/SP-III TPU IP
Address
The TPU/SP-III TPU IP address is set up at the factory. However, should a
different address be required, it can be changed.
To change the TPU/SP-III TPU IP address:
Connect the supplied null modem cable to the NAV connector of the
1.
TPU/SP-III TPU and to an available USB port on the SonarPro Workstation or
to an available serial port on the laptop computer using the USB/RS-232
converter supplied with the computer.
2. Turn on the SonarPro Workstation or the laptop computer and wait for the
Windows desktop to appear.
3. Turn on the TPU, or turn on the SP-III TPU by switching the A/C-D/C switch to
A/C for AC operation or to D/C for DC operation.
4. Start Linux TPU Updater.
The Klein Linux TPU Updater dialog box opens.
5. Click Read TPU IP Address .
The Select RS-232 Port dialog box shown in Figure B-2 opens.
6. From the Port drop-down list box, select the serial port on the laptop computer to
which the TPU/SP-III TPU is connected.
7. From the Rate drop-down list box, select the baud rate of the TPU/SP-III TPU's
NAV serial port, or select Determine Automatically to have Linux TPU Updater
find the rate.
The Klein Linux TPU Updater dialog box opens with the current IP address
displayed in the
Series 4000 Sonar System Operations and Maintenance Manual
The Select RS-232 Port Dialog Box.
Figure B-2:
text box as shown in Figure B-3.
TPU IP Address
P/N 11210094, Rev. 01