Klein 4000 Series Operation And Maintenance Manual page 58

4-6
CHAPTER 4 Equipment Maintenance
Using the 5-mm hex key,
8.
tighten the three locking
screws in the towfish
housing forward end cap.
Screw the tail cone
9.
retaining bolt into the
threaded hole in the
middle of the forward end
cap.
Series 4000 Sonar System Operations and Maintenance Manual
Tightening the Locking Screws in
Figure 4-6:
the Towfish Housing Forward End Cap
Screwing the Tail Cone Retaining
Figure 4-7:
Bolt into the Forward End Cap
Locking
screw (3)
P/N 11210094, Rev. 01