Compliance: Worldwide - Ferno Integrated Patient Transport & Loading System iNX User Manual

Specifications/Standards
Contact Information
For information about AMD standards:
Ambulance Manufacturer's Division
National Truck Equipment Association
37400 Hills Tech Drive
Farmington Hills, MI, 48331-3414
Internet: www.ntea.com
For information about CAAS standards:
CAAS
1926 Waukegan Road, Suite 300
Glenview, IL, 60025-1770
Internet: www.caas.org
For information about Federal Ambulance
Specification KKK-A-1822 revision F (2007):
Office of Motor Vehicle Management,
General Services Administration,
2200 Crystal Drive, Suite 1006
Arlington, VA, 22202
Internet: www.gsa.gov/automotive
For information about NFPA® standards:
National Fire Protection Association
1 Batterymarch Park
Quincy, MA, 02169-7471
Internet: www.nfpa.org
For information about SAE standards:
Warrendale, PA, USA - Headquarters
400 Commonwealth Drive
Warrendale, PA 15096
p: +1.724.776.4841
f: +1.724.776.0790
Internet: www.sae.org
For information in Alberta, Canada:
Internet: http://www.albertahealthservices.ca/
For information in British Columbia, Canada:
Internet: http://www.bcehs.ca/
© Ferno-Washington, Inc. / 234-3622-06 / March 2019
Safety Information

1.9 Compliance: Worldwide

SPECIFICATIONS AND STANDARDS
The iN∫X® meets or exceeds the following global specifications
and standards. Be aware: standards and specifications are
updated periodically. Current guidelines are available from
these organizations.
AMD: Ambulance Manufacturer's Division (AMD) of the
●
National Truck Equipment Association Standard 004
(Oct. 2014), Litter Retention System Static Test.
KKK-A-1822 (F): Federal Ambulance Specification
●
KKK-A-1822 revision F (2007), Change Notice 11 (2018)
as applicable.
NFPA: National Fire Protection Association standard
●
NFPA® 1917 (2016 edition).
SAE: Society of Automotive Engineers SAE J3027
●
Recommended Practice (2014). See below.
CAAS: Commission on Accreditation of Ambulance
●
Services Global Vehicle Standard (GVS) v1.0
IP56: Ingress Protection rating. Tested in compliance
●
with dust and water infiltration standards.
IEC 60601-1-2 (electrical and electromagnetic medical
●
equipment standards)
IEC 2007/47
●
MDD: Ferno products meet the requirements of the
●
European Medical Device Directive 93/42/EEC as
established by the European Union.
CSA: Electronic
●
Standards Association requirements.
Ontario: Ontario Land Ambulance Standard, Version 5.0,
●
September 28, 2012; Section 20.1 Main Cot Retention
BCAS: BCAS Ambulance Performance Test Criteria E2
●
Stretcher Retention
Alberta: Alberta Health and Wellness Ambulance
●
Vehicle Standard Code January 2010; Section 17.5 Cot
Retention System Test
AMD: Ambulance Manufacturer's Division (AMD) of the
●
National Truck Equipment Association Standard 004
(August 2007 edition), Litter Retention System Static Test.
(Some areas of Canada follow the U.S. AMD specification.)
AS/NZS 4535:1999: Meets the requirements of the
●
Ambulance Restraint Systems test.
EN 1789:2007+A2:2014: Vehicle, fastening system,
●
and crash-test standards.
CANADA
components meet
AUSTRALIA/NEW ZEALAND
EUROPEAN STANDARDS
Canadian
7