Ferno iNX Stretcher Quick Start Manual

Ferno iNX Stretcher
Securing the Patient
1. Unbuckle all straps in preparation for
the patient.
2. Position patient in center of stretcher
with patient's back flat, and buttocks
at the joint of the stretcher.
3. Lay shoulder straps on the patient's
chest with the red webbing and metal
links extended to the patient's waist.
4. Take the pelvis strap buckle (male
part) and guide it through the slots in
the shoulder strap links. Buckle the
pelvis strap to connect all red parts.
5. Adjust the shoulder and pelvis straps
to be snug on the patient.
6. Fasten the black chest strap across the
patient's rib cage.
7. Fasten the black leg restraint over the
patient's legs and snug.
7.
3. 3.
4. 4.
6.
* Some older Ferno stretchers may use a
different shoulder restraint. Refer to the
appropriate Ferno manual and videos for
complete instructions and information on
product storage and maintenance.
Published September 2023