Initial Setup; Ambulance Information; Accessories; Charge And Install The Battery - Ferno Integrated Patient Transport & Loading System iNX User Manual

Table of Contents

The ambulance bumper extension must not exceed 13" (330

mm). The patient compartment must have a level floor large

enough for the fully lowered iN∫X, and an iN∫LINE installed.

Before placing the iN∫X in service, assign appropriate

personnel to install any accessories shipped with the iN∫X.

Keep accessory users' manuals with this manual for future

reference. To order accessories, see "Accessories" on page

65. For additional free manuals, contact Ferno. See "Ferno

Customer Relations" on page 2.

Charge the battery immediately upon receipt of the iN∫X

using only the provided battery charger (Figure 68) or by

securing the iN∫X in the properly connected and powered

iN∫LINE. The charger is compatible with standard household

electricity.

The charger is supplied with the proper cable and plug

for your location. See "Battery Charger" on page 21 and

"Charging the Battery" on page 54.

To install the battery, see "Attaching the Battery" on page 20.

7 - INITIAL SETUP

Attaching improper items to the iN∫X can cause injury.

Use only Ferno-approved items on the iN∫X.

Loose items and debris on the patient compartment floor

can interfere with locking the iN∫X into the iN∫LINE. Keep

the patient compartment floor clear.

WARNING

NOTICE

Table of Contents

Show Quick Links

Table of Contents