Display Zones; In∫X Zone; Timer Zone - Ferno Integrated Patient Transport & Loading System iNX User Manual

4.4 Display Zones

The display is ON when the power switch is ON, and OFF
when the power switch is OFF or when the iN∫X enters Sleep
Mode.
To turn the display ON, use the power switch (see "Power
Switch" on page 17). To awaken from Sleep Mode, press .
See "Sleep Mode" on page 22.
The display is divided into four zones (Figure 5):
iN∫X ZONE: This zone displays the iN∫X with areas color-
●
coded to indicate the current status of each area.
TIMER ZONE: This zone is illuminated when the iN∫X is in
●
an alternate operating mode. It displays a countdown
timer. See "Direct Power Modes" on page 42.
STATUS ZONE: This zone illuminates with indicators
●
to provide function and safety information. Based on
the condition, a warning triangle, other symbol, and/or
alphanumeric code may be displayed. See "Status Zone"
on page 19 and "Status Indicators" on page 63.
BATTERY ZONE: This zone indicates the charge of the
●
battery. See "Battery Zone" on page 19.


Note: For alternate-mode screens, see "Direct Power Modes" on
page 42 and "Set the Loading Height" on page 61.
Press Green to Go
To activate the iN∫X after turning the power
switch ON, or to wake the iN∫X from Sleep
Mode, press . Note: Only the
activate/wake up the iN∫X.
4.5 iN∫X Zone
The main display area shows the iN∫X (Figure 5). The color of
the legs and patient surface indicates the current status of
these areas. Refer to the iN∫X Zone Indicators table at right.
The iN∫X zone is illuminated whenever the power is ON.

4.6 Timer Zone

A countdown timer is visible in the lower-left corner of the
display only when an alternate operating mode is selected
(Figure 6). Use the mode-select button to select an alternate
operating mode. See "Mode-Select Button" on page 23 and
"Direct Power Modes" on page 42.
If the countdown timer is allowed to expire, the iN∫X returns
to its default operational mode and normal display screen.
18
Features and Controls
button will
Countdown Timer
iN∫X Zone
15
N04
Timer Zone Status Zone
iN∫X Zone Indicators
LEG
Green The legs may be extended and/or retracted.
White The legs will not extend or retract.
The iN∫X is in a direct power mode. The blue
Blue
legs will move when a button is pressed.
PATIENT SURFACE
White The iN∫X is at a safe transport height.
The iN∫X is above the maximum recommended
Yellow/Red
transport height. Lower the iN∫X before rolling.
WHEELS
The iN∫X may be rolled, if the patient surface
Green/White
is at a suitable transport height.
Red Do not roll the iN∫X.
N01
15
© Ferno-Washington, Inc. / 234-3622-06 / March 2019
Battery Zone
5
6