Ferno Integrated Patient Transport & Loading System iNX User Manual page 41

46
47
© Ferno-Washington, Inc. / 234-3622-06 / March 2019
Using the iN∫X
Safety Hook Release Lever
6. Control-end Operator: Tell the Loading-end Operator
to disengage the intermediate safety bar from the
safety hook.
Both Operators: Roll the iN∫X out of the ambulance
7.
until the safety hook captures the center of the
loading-frame safety bar (Figure 46).
Control-end Operator: Press
8.
end legs (Figure 47).
Control-end Operator: Tell the Loading-end Operator to
9.
disengage the load-end safety bar from the hook.
10. Both Operators: While maintaining your grasp on the
main frame and guide bar with both hands, roll the
iN∫X out of the ambulance, then stop rolling.
11. Control-end Operator: Press
the factory-set transport height.
to extend the loading-
to lower the iN∫X to
41