In∫X Overview; Description - Ferno Integrated Patient Transport & Loading System iNX User Manual

3.1 Description

The Ferno® iN∫X® Integrated Patient Transport & Loading System
is an emergency patient-handling device designed to transport
a patient over various terrain, to be loaded into and unloaded
from an ambulance, and for transport inside a ground-based
ambulance.
In this manual, the term "iN∫X" is used to represent the iN∫X®
Integrated Patient Transport & Loading System
The iN∫X is for professional use by a minimum of two trained
operators. The iN∫X is designed to help reduce the risk of
back injury to medical service personnel by eliminating
or minimizing the amount of lifting required to extend or
retract the legs.
During powered operation, the iN∫X does not require lifting
when loading into an ambulance or unloading from an
ambulance.
The iN∫X may be operated manually when desired.
COMPATIBLE FASTENING SYSTEMS
Ferno® iN∫LINE® series fastening system
●
Ferno® battery charger and adapter cable
●
iN∫X battery
●
Mattress with heat-sealed vinyl exterior and polyurethane
●
foam pad interior
Set of patient restraints
●
Users' manual and training DVD
●
ICS® charging contacts standard
●
12
3 - iN∫X OVERVIEW
.
™
INCLUDED
™
Improper use of the iN∫X can cause injury. Use the iN∫X
only for the purpose described in this manual.
700 lb/318 kg lifting capacity (load capacity)
●
● Independent-leg, powered transport loading system
Legs auto-equalize before extending or retracting
●
Safety Lighting System
●
Variable height adjustment allows level loading into an
●
ambulance with a floor of up to 35" (889 mm)
User-set loading height (maximum 35"/892 mm)
●
Meets IP 56 (Ingress Protection rating) dust, water
●
36-Volt DC power system with dual actuators
●
● Multifunction display
Position-indicator lights
●
Simple / operation
●
Multi-position sidearms
●
● Telescoping handles (control end)
Coated handling surfaces keep hands/clothes clean
●
Four 6-inch, tri-spoke swivel transport wheels
●
2 Wheel locks
●
● Pneumatic backrest
Three-position telescoping loading-end frame
●
Two-position shock frame
●
Direct power and non-powered backup systems
●
© Ferno-Washington, Inc. / 234-3622-06 / March 2019
WARNING
FEATURES