Non-Powered Operation (Actuator-Release Handles) - Ferno Integrated Patient Transport & Loading System iNX User Manual

28
© Ferno-Washington, Inc. / 234-3622-06 / March 2019
Features and Controls
4.24 Non-Powered Operation
(Actuator-Release Handles)
The actuator-release handles allow non-powered operation.
Each handle allows one set of legs to be raised or lowered
without power. The handles are located:
Control-end legs: below the shock frame (Figure 28)
●
Loading-end legs: below the backrest frame (Figure 28)
●
To unlock a handle from the storage mount, pull the handle
straight out of the mount. To re-secure, press the handle into
the mount until it snaps into the locked position.
For instructions on operating the iN∫X using the actuator-
release handles, see the following sections:
● "Non-Powered Operation: Extending and Retracting" on
page 44
"Non-Powered Operation: Loading" on page 46
●
"Non-Powered Operation: Unloading" on page 47
●
29