Setting The Cpv Direct; Fitting And Removing The Switch Module - Festo CPV GE-CO2-8 Series Electronic Manual

1. Installation
1.2

Setting the CPV Direct

1.2.1 Fitting and removing the switch module

Festo P.BE-CP-CO2-EN en 0107NH
Caution
The switch module contains electrostatically sensitive
components.
– Do not therefore touch any contacts.
– Observe the regulations for handling electrostatically
sensitive components.
The switch module must be removed before the CPV Direct
can be set.
Fig. 1/2: Fitting/removing the switch module
1-5