Connecting Gas; Electrical Connections; General Safety Instructions For Electrical Connections - Siemens SIPROCESS GA700 Operating Instructions Manual

Connecting the device

8.2 Electrical connections

Design of the gas connections
Dimensions of purging gas couplings
Diameter
Length
8.1.5

Connecting gas

Procedure
1. Connect the gas lines by means of suitable clamping ring screwed connections to the
associated gas inlets and outlets.
When tightening the union nuts at the screwed connections make sure that you counter
properly.
2. Check the clamping ring screwed connections for a tight fit and the pipe connections for
leaks.
8.2 Electrical connections
8.2.1

General safety instructions for electrical connections

Incorrect electrical connection
Danger of electrocution
• Connect the device to the power supply in accordance with the technical specifications.
• At the mounting location of the device observe the applicable directives and laws for
88
WARNING
The information about proper electrical connection is available in section "Technical
specifications (Page 141)".
installation of electrical power installations with rated voltages below 1000 V.
Exterior
Without sealing caps
With sealing caps
Operating Instructions, 05/2018, A5E31930403-06
12 mm
28 mm
41 mm
Wall-mounted device