7.8
Wiring option modules
Overview
①
②
Figure 7-13
Note
ULTRAMAT 7: Deviating position of the OM2.x connections
With ULTRAMAT 7 analyzer modules the connector of the option module is not on the
printed circuit board but is on an additional circuit board. This is mounted horizontally at the
upper end of the analyzer module.
Wall-mounted device
Operating Instructions, 05/2018, A5E31930403-06
Installing / removing and connecting analyzer and option modules
Analyzer module printed circuit board
Interface
Connecting option modules based on the example of an OXYMAT 7
7.8 Wiring option modules
75