Reference Gas Monitoring; Calomat 7; Module Design - Siemens SIPROCESS GA700 Operating Instructions Manual

Description

4.6 CALOMAT 7

4.5.3

Reference gas monitoring

Only the device versions of the ULTRAMAT 7 with a flow-type reference end are equipped
with reference gas connections. The reference gas connections are implemented as nozzles
with an outer diameter of 6 mm.
To connect the reference gas supply and return lines use only such gas-contacted
connecting parts that are suitable for the connection and the reference gas.
The flow rate of the reference gas can range from 0.1 l/min to 1.5 l/min. We recommend a
flow rate of approx. 0.5 l/min.
For devices without flow-type reference compartment, the reference cuvette is filled with
nitrogen and hermitically sealed.
4.6 CALOMAT 7
4.6.1

Module design

①
②
③
④
Figure 4-8
32
Sample gas inlet
Sample gas outlet
Not assigned
Not assigned
Design of CALOMAT 7, sample gas path with pipes
⑤
Power supply connection
⑥
Connection optional module 2.x (OM2.x)
⑦
Connection internal bus communication
Operating Instructions, 05/2018, A5E31930403-06
Wall-mounted device