Installing the device
6.1 General safety instructions for installation
Insufficient ventilation
Risk of fire
The device may overheat or start burning in the case of insufficient ventilation.
• Make sure that the room is sufficiently ventilated.
NOTICE
Improper installation
The device can be damaged or destroyed or its functionality impaired through an incorrect
installation.
• Make sure before installing the device that there is no visible damage.
• Ensure that the process connections are clean and that the seals and cable glands are
• Mount the device using a suitable tool.
NOTICE
Air circulation around the device
Device damage
The device may overheat in case of heat build-up
• Ensure that there is a sufficient circulation of air around the device.
• If you are installing more than one wall-mounted device, there should be a clearance of
NOTICE
Aggressive atmospheres
Damage to device through penetration of corrosive vapors
• Make sure that the device is suitable for the area of use.
54
WARNING
Refer to the information in section "Technical specifications (Page 141)".
suitable.
≥ 5 cm between the sides of the devices.
Operating Instructions, 05/2018, A5E31930403-06
Wall-mounted device