Safety Instructions; Requirements For Safe Use; Laws And Directives - Siemens SIPROCESS GA700 Operating Instructions Manual

Safety instructions

2.1

Requirements for safe use

In terms of safety, this device left the factory in perfect condition. In order to maintain this
status and to ensure safe operation of the device, observe these operating instructions and
all the information relevant to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state and renew it, if necessary.
Symbol
2.1.1

Laws and directives

Observe the test certification, provisions and laws applicable in your country during
connection, assembly and operation in the respectively valid version. These include, for
example:
● National Electrical Code (NEC - NFPA 70) (USA)
● Canadian Electrical Code (CEC) (Canada)
Additional information is available at:
Certificate (Page 158)
Wall-mounted device
Operating Instructions, 05/2018, A5E31930403-06
Description
Consult operating instructions
Hot surface
Dangerous electrical voltage
2
15