Siemens SIPROCESS GA700 Operating Instructions Manual page 142

Technical specifications
13.2 Technical specifications of the wall housing
Electrical characteristics
EMC interference im-
munity (electromagnetic
compatibility)
during operation:
Electrical safety
Power unit cable
Table 13- 3
Purging gas pressure
Continuous (recommended)
Continuous (maximum)
Transient (maximum)
Table 13- 4
Electrical inputs and outputs
Digital outputs (DO)
Digital inputs (DI)
Ethernet interface (bottom)
Service interface (inside at PU)
142
with one and/or
two OXYMAT 7 /
ULTRAMAT 7
units
with one or two
CALOMAT 7
units
Wall housing: Purging gas pressure
Wall housing: Electrical inputs and outputs
in accordance with the standard requirements of
NAMUR NE21 (05/2006) and EN 61326-1 (2013)
in accordance with the standard requirements
NAMUR NE21 (05/2006) and EN 61000-6-
2:2005
in accordance with EN 61010-1, overvoltage category II
Max. Ø 10 mm , max. 3 x 2.1 mm
2
30 hPa above ambient
< 100 hPa above ambient pressure
165 hPa above ambient pressure
8, with changeover contacts, parameters can be freely
assigned, e.g. for measuring range identification;
max. load: 24 V AC/DC/1.7 A (total load for all 8 relay out-
puts in continuous operation max. 160 W), floating, non-
sparking
8, designed for 24 V, isolated, freely parameterizable, e.g.
for autoranging
Ethernet RJ 45, 100 MBit
Ethernet RJ 45, 100 MBit
Operating Instructions, 05/2018, A5E31930403-06
No
2
Wall-mounted device