Table of Contents
Advertisement
Connecting
8.1
Overview
Connection options
The NCU has a series of interfaces via which the power supply and the remaining system
components are connected. The front cover of the NCU must be open to make the connections.
• The various SINAMICS components are connected with the NCU via DRIVE-CLiQ.
• Actuators and sensors can be connected to the digital inputs/outputs.
• The NCUs have the following communication options:
– PROFIBUS DP, Ethernet
– PROFINET
The following overview shows an example of the various interfaces and their connection
options.
NCU 1750
Equipment Manual, 10/2023, A5E45627807B AH
8
57
Advertisement
Table of Contents
