Installing / removing and connecting analyzer and option modules
7.4 Installation of analyzer modules
7.4
Installation of analyzer modules
Overview
①
②
③
Figure 7-2
Procedure
1. Isolate the wall-mounted device from power.
2. Loosen the six screws
62
Wall-mounted device
Door screw (6 units)
Equipotential bonding
cable
Installing an analyzer module, example OXYMAT 7
②
④
Flat seal
⑤
Torx screw enclosure floor (8 units)
⑥
OXYMAT 7 analyzer module
and open the door.
Operating Instructions, 05/2018, A5E31930403-06
Wall-mounted device