7.6
Removal of analyzer modules
Overview
①
②
③
Figure 7-7
Procedure
1. Isolate the wall-mounted device from power.
2. Loosen the six screws
Wall-mounted device
Operating Instructions, 05/2018, A5E31930403-06
Installing / removing and connecting analyzer and option modules
Wall-mounted device
Door screw (6 units)
Equipotential bonding cable
Removing an analyzer module, example OXYMAT 7
②
④
Flat seal
⑤
Torx screw enclosure floor (8 units)
⑥
OXYMAT 7 analyzer module
and open the door.
7.6 Removal of analyzer modules
67