Actuator Control Board Test - Sega OUTRUN 2 SPECIAL TOURS SDX Service Manual

D. ACTUATOR CONTROL BOARD TEST
If a limit switch requires adjustment, request the work be done by the office listed
in this manual or the point of purchase. Attempting to perform the work without
specialized techniques or knowledge can result in accidents. Making improper
adjustments can cause accidents during operation.
The status of each actuator and limit switch can be confirmed. Periodically use this screen to confirm the proper
operation of the actuators.
However, status cannot be confirmed in the event of an "L SERVO AMP ERROR" or "R SERVO AMP ERROR".
FIG. 3-3da Actuator Control Board Test Screen
L represents left side, R represents right side, CW represents downward, and CCW represents upward.

ACTUATOR CONTROL BOARD TEST

L CW LIMIT SWITCH
L CCW LIMIT SWITCH
R CW LIMIT SWITCH
R CCW LIMIT SWITCH
L ACTUATOR
R ACTUATOR
INITIALIZE
L ACT CW MOVE
L ACT CCW MOVE
R ACT CW MOVE
R ACT CCW MOVE
LR ACT CW MOVE
LR ACT CCW MOVE
L ACT CW R ACT CCW MOVE
L ACT CCW R ACT CW MOVE
ACTUATOR MOVE SPEED
-> EXIT
SELECT WITH SERVICE AND PRESS TEST
OFF
OFF
OFF
OFF
***mm
***mm
LOW (MID /HIGH)