2 Features and Functions
Communication (Optional Accessories)
The meter is reserved with communication capability. The optional IR- USB
package comes with full optical isolated cable and software. This function
enables the user to record the data easily. Refer to the following
procedures to set up the communication between your meter and personal
computer (PC).
1 Connect one side of the cable to the meter with the Agilent Logo facing
2 Run the software to transfer the data to the PC for your applications.
3 To remove the cable, press and pull the snap ends on each side of the
Figure 2-9 Cable connection of remote communication
28
up and connect the USB connector to the PC.
cable that is connected to the meter.
U1701B User's and Service Guide