Operational.check - Assa Abloy Sargent v.S1 Profile Installation Instructions Manual

Profile Series v.S1 PoE Cylindrical Lock
Operational Check
9
1. Insert key into cylinder and rotate.
There should be no friction against lock case, wire harness or any other obstructions.
2. Check that the key retracts the latch.
The key should rotate freely.
3. Use a prox 125 kHz or 13.56 MHz iCLASS credential, or keypad PIN code set up with the
Network and Lock Configuration Tool
Network Lock and Configuration Tool
Refer to
to configure and program v.S1 locks.
to unlock outside lever and retract latch.
WFMN1D
user manual ( ) for information on how
A7763B 19