Table of Contents
Advertisement
Quick Links
A7786G
04/15
Copyright 2015, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
v.S2
Profile
WiFi Mortise Lock
Installation Instructions
To view helpful video installation tips, scan the
Microsoft® Tags with your mobile phone.
Download the free mobile app at
http://getscanlife.com.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Assa Abloy Sargent V.S2
Summary of Contents for Assa Abloy Sargent V.S2
- Page 1 Microsoft® Tags with your mobile phone. Download the free mobile app at http://getscanlife.com. A7786G 04/15 Copyright 2015, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
-
Page 3: Table Of Contents
Table of Contents Warning ...................2 General Description ..............4 Hardware Specifications ............4 Electronic Specifications ............4 Installation Wiring Overview ...........4 Lock Wiring ................5 Parts Breakdown ..............6 Installation Instructions ............7 Warning Warning: Changes or modifications to this unit not expressly approved by ASSA ABLOY Inc. -
Page 4: General Description
DesFire, and Felica • Supports most current WiFi networks Installation Wiring Overview security standards • For specific security information, please SARGENT Profile Series WiFi contact a local ASSA ABLOY Door v.S2 Typical Application Security Solutions sales consultant or call 800-810-WIRE Internal Building 802.11b/g Wireless Network Device... -
Page 5: Lock Wiring
Profile Series v.S2 WiFi Mortise Lock Lock Wiring Controller Board Connectors (Inside Escutcheon) Ring Terminal Power From Trim From Lock Body 1-800-810-WIRE • www.sargentlock.com • A7786G... -
Page 6: Parts Breakdown
Profile Series v.S2 WiFi Mortise Lock Parts Breakdown 125 kHz Prox and 13.56 MHz iCLASS *Patent Pending 1-800-810-WIRE • www.sargentlock.com • A7786G... - Page 7 Profile Series v.S2 WiFi Mortise Lock Parts Breakdown 125 kHz Prox and 13.56 MHz iCLASS, continued ITEM PART NO. DESCRIPTION QTY. Outside Lever Reference 8200 Catalog for available levers Inside Lever Reference 8200 Catalog for available levers 82-0493 O/S Escutcheon only with Cylinder 82-0495 O/S Escutcheon only without Cylinder 82-0492...
-
Page 8: Installation Instructions
Profile Series v.S2 WiFi Mortise Lock Installation Instructions 1 – Door Preparation A. Verify Hand and Bevel of Door Stand on outside/locked side of door when determining the door hand. LHRB RHRB Left Hand Left Hand Right Hand Right Hand Hinges Left Reverse Bevel Hinges Right... - Page 9 Profile Series v.S2 WiFi Mortise Lock 2 – How to Change Hand of Lockbody A. Reverse Lock Hand Red surface of locking piece must face the outside/ locked side of door. To rotate locking piece (Fig. 2A): Right Hand 1. Position lock body with red surface of locking piece Lock Shown visible.
- Page 10 Profile Series v.S2 WiFi Mortise Lock 3 – Install Lockbody 1. Insert lock body into mortised cutout (Fig. 3). 2. Harness exits non-cylinder side of hole. 3. Hold lock body loosely in place with (2) lock body screws (Fig. 3). Note: Do not completely tighten screws at this time.
- Page 11 Profile Series v.S2 WiFi Mortise Lock 5 – Install Gasket (for Exterior Doors) Gasket For exterior applications, use weather seal gasket between escutcheon and outside door surface. To apply weatherseal gasket: 1. Carefully remove the backing from the gasket. (Fig. 5A). Keypad 2.
- Page 12 Profile Series v.S2 WiFi Mortise Lock 7 – Install and Secure Cylinder Note: For 8276 and 8278, loosely thread cylinder through escutcheon and into the lock body before tightening the Outside of Door lock case screws and escutcheon through bolts. 1.
-
Page 13: Security Screw
Profile Series v.S2 WiFi Mortise Lock 8 – Escutcheon Wire Connections Tabs Images are shown without gasket. If gasket is necessary, refer to 5. Before the controller is attached to the door: 1. Remove the cover from the inside escutcheon by removing the security screw with the provided tool (Fig. -
Page 14: Wire • Www.sargentlock.com • A7786G
Profile Series v.S2 WiFi Mortise Lock 9 – Install Inside Escutcheon 1. Gently fold the excess ribbon cable and wires, being careful not to pinch wires (Fig. 9). 2. While positioning inside escutcheon for installation, ensure that the thumbturn properly engages the slot in the lock body. - Page 15 Profile Series v.S2 WiFi Mortise Lock 11 – Install and Remove Batteries* *IMPORTANT: Batteries are optional if controller is powered by external power supply. 1. To install or replace batteries, first remove the battery cover (if necessary) using the provided security tool. 2.
- Page 16 Profile Series v.S2 WiFi Mortise Lock 12 – Operational Check 1. Test the thumbturn by retracting and projecting the deadbolt. 2. Perform an operational check of the key pad by pressing each button and hearing a “beep” after each number pressed. A double beep will sound after the asterisk is pressed.
- Page 17 Profile Series v.S2 WiFi Mortise Lock 13 – Attach Front Plate 1. Fully tighten two (2) lock body screws. 2. Attach front plate with (2) flat head screws. Scan to see a video of this installation step. Outside of Door Attach Front Plate Front Plate (2) Flat Head Screws...
- Page 18 Profile Series v.S2 WiFi Mortise Lock Notes A7786G...
- Page 20 The company’s customer base includes commercial construction, institutional, and industrial markets. Copyright © 2015, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Need help?
Do you have a question about the Sargent V.S2 and is the answer not in the manual?
Questions and answers