Assa Abloy Sargent v.S1 Profile Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Assa Abloy Manuals
  4. Locks
  5. Sargent Profile v.S1
  6. Installation instructions manual
Assa Abloy Sargent v.S1 Profile Installation Instructions Manual

Assa Abloy Sargent v.S1 Profile Installation Instructions Manual

Poe cylindrical lock
Hide thumbs Also See for Sargent v.S1 Profile:
Table of Contents

Advertisement

Quick Links

A7763B
02/11
Copyright 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
v.S1
Profile
PoE Cylindrical Lock
Installation Instructions

Advertisement

Table of Contents
loading

Related Manuals for Assa Abloy Sargent v.S1 Profile

Summary of Contents for Assa Abloy Sargent v.S1 Profile

  • Page 1 Profile PoE Cylindrical Lock Installation Instructions A7763B 02/11 Copyright 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

  • Page 2: Table Of Contents

    Installation.Wiring..............4 Parts.Breakdown..............9 Installation.Instructions............11 Operational.Check..............19 Changes or modifications to this unit not expressly approved by ASSA ABLOY Inc. Warning could void the user’s authority to operate the equipment. FCC: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules.

  • Page 3: General.description

    Profile Series v.S1 PoE Cylindrical Lock General Description The SARGENT Profile Series v.S1 cylindrical lock is available with either an HID® Prox 125 kHz or 13.56 MHz iCLASS® technology reader. It utilizes existing infrastructure and IEEE 802.3af PoE (Power over Ethernet) technology as a proven alternative to traditional access control installations.

  • Page 4: Installation.wiring

    Profile Series v.S1 PoE Cylindrical Lock Installation Wiring PoE frame harness assembly (From McKinney) DPS: Door Position Switch (cylindrical and exits only) PoE data hinge (Patent Pending) (From McKinney) Profile Series v.S1 PoE lock PoE door harness* (From McKinney) * Order of installation may vary. Refer to appropriate sections for instructions.
  • Page 5 Profile Series v.S1 PoE Cylindrical Lock Frame Harness Installation Cut.end./.ceiling-side.PoE.harness:. Supplied.by.CI Suggested installation of components and wire harness supplied by McKinney: B-Splice TIA-568-B.Standard.Wiring .Crimp.Connector Pair Number Wire White/Blue White/Blue Blue RJ45-M White/Orange Ceiling White/Orange Orange White/Green White/Green 24AWG Green Stranded White/Brown Wire for White/Brown...
  • Page 6 Profile Series v.S1 PoE Cylindrical Lock Installation Wiring (Continued) PoE Door Harness Order of installation may vary. Refer to appropriate sections for instructions. 1. Prop door open. 2. Tape the two lock-side 4-pin connectors to the ring terminal. 3. Using the ring terminal, carefully fish the assembly through the door channel to the lock. 4.
  • Page 7 Profile Series v.S1 PoE Cylindrical Lock Door Position Switch 1. Prep door according to proper template (Fig. D1). 2. Insert connector end of DPS through the raceway on the latch edge of the door (Fig. D2). Note: Only use collar when installing in a metal door. 3.
  • Page 8 Profile Series v.S1 PoE Cylindrical Lock PoE Lock Wiring Ground Ring Terminal (From Hinge to Top Left Escutcheon Screw) J P 4 J P 4 T P 7 T P 7 C 2 1 C 2 1 T P 8 T P 8 R 2 1 R 2 1...

  • Page 9: Parts.breakdown

    Profile Series v.S1 PoE Cylindrical Lock Parts Breakdown 125 kHz Prox and 13.56 MHz iCLASS A7763B...
  • Page 10 Profile Series v.S1 PoE Cylindrical Lock Parts Breakdown 125 kHz Prox and 13.56 MHz iCLASS, continued ITEM PART NO. DESCRIPTION REQ’D Outside Lever Reference Cylindrical/10 Line Catalog For Available Levers Inside Lever Reference Cylindrical/10 Line Catalog For Available Levers 10-3016 Outside Escutcheon Assembly 10-3015 Inside Escutcheon Assembly...

  • Page 11: Installation.instructions

    Profile Series v.S1 PoE Cylindrical Lock Installation Instructions Step #1 – Door Preparation A..Verify.Hand.and.Bevel.of.Door Stand on outside/locked side of door when determining the door hand LHRB. RHRB. Left Hand Left Hand Right Hand Right Hand Hinges Left Reverse Bevel Hinges Right Reverse Bevel Open Inward Hinges Left...
  • Page 12 Profile Series v.S1 PoE Cylindrical Lock Centerline of Latch Step #2 – Install Strike Front and Strike Install strike in the door frame (Fig.2A). (2) #8-32 x 3/4" Latch Screws Outside.of.Door Fig...2A Step #3 - Install Latchbolt 1. Install latch with beveled bolt facing the strike. 2.
  • Page 13 Profile Series v.S1 PoE Cylindrical Lock Step #5 – Lock Adjustment Through-bolt Hole A..Lock.Preset: • Lock body holes: 12 and 6 o’clock (Fig. 5A). Outside.of.Door • Door thickness: 1-3/4” thick. Refer to adjustments below for other door conditions (Fig. 5B Detail). B..Through-Bolt.and.Door.Thickness.Adjustment: 1.
  • Page 14 Profile Series v.S1 PoE Cylindrical Lock Outside.of.Door Step #6 - Install Lock 1. Feed wires into the lock body hole from outside of door (Fig.6A). 2. Slide lock body into cross-bore hole from outside (locked side) of the door (Fig. 6B). 3.
  • Page 15 Profile Series v.S1 PoE Cylindrical Lock Step #8 – Install Gasket and Outside Escutcheon For exterior applications, use weatherseal gasket between escutcheon and outside door surface. To apply weatherseal gasket: Carefully remove the backing from the gasket (Fig. 8A). 2A. For fire rated doors: Feed ribbon cable with connector and ground wire from outside of door through weather seal gasket and fire stop plate (Fig.
  • Page 16 Profile Series v.S1 PoE Cylindrical Lock Inside.of.Door Ground Step #9 – Escutcheon Wire Connections Ring Terminal Images are shown without gasket. 4-Pin Connectors If gasket is necessary, refer to Step #5. From Hinge Before the controller is attached Reader to the door: Ribbon Cable 1.
  • Page 17 Profile Series v.S1 PoE Cylindrical Lock Step #11 – Ciruit Board Wiring Before installing escutcheon, route raceway cables and ground attach to front of circuit board. Turn the controller assembly over: Ground 1. Route the raceway connectors over the top of the controller assembly Ring and plug into the front of the circuit board (side that faces out when Terminal...
  • Page 18 Profile Series v.S1 PoE Cylindrical Lock Step #13 – Attach Outside Lever 1. Slide lever handle onto spindle until fully seated (Fig. 13A). 2. Rotate key 45 degrees clockwise. 3. Push lever until lever catch is engaged. ˚ Inside Lever Push Pin Tool Fig...13A Step #14 –...

  • Page 19: Operational.check

    Profile Series v.S1 PoE Cylindrical Lock Operational Check 1. Insert key into cylinder and rotate. There should be no friction against lock case, wire harness or any other obstructions. 2. Check that the key retracts the latch. The key should rotate freely. 3.
  • Page 20 The company’s customer base includes commercial construction, institutional, and industrial markets. Copyright © 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Table of Contents