Advertisement
ML20900 ECL Series Mortise Lock
For mortise locks with cylinders:
a. Insert key into cylinder and rotate: There should be no friction
against lock case, wire harness or any other obstructions.
b. The key will retract the latch: Key should rotate freely.
c. Inside lever: Ensure it retracts the latch.
d. Close door: Ensure latch fully extends and does not bind.
Lock/UnLock Check:
a. Turn power ON.
b. Send unlock signal from control panel.
c. Verify lock unlocks and re-locks at desired intervals.
Switch Signal Check:
d. Monitor switch signals at control panel and verify each
switch activates correctly based on chosen wiring
configuration (NO/NC).
EAC Card Reader Check:
e. Refer to Card reader instructions.
7) Mechanical Operational Check
8) Electrical Operational Check
16
ASSA ABLOY
Copyright © 2014 Corbin Russwin, Inc. All rights reserved.
Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
®
- Quick Links:
- Installation Instructions
- Wiring Diagrams
Hide quick links:
Advertisement
