Adjust The Volume - CyberData 011404 Operation Manual

2.2.23 Adjust the Volume

There are two ways to adjust the volume for the SIP Loudspeaker Amplifier (AC-Powered):
•
•
2.2.23.1 The SIP Volume
To adjust the volume of the device with the
following steps:
1. Go to the
2. Select the
3. In the
4. Select Save.
2.2.23.2 The Multicast Volume
To adjust the
complete the following steps:
1. Go to the
2. Select the
3. In the
4. Select Save.
Operations Guide
The SIP Volume setting on the
The external Volume dial
face
Figure 2-29. External Volume Dial
Setting
Home Page.
Device Page page.
SIP Volume box, type a number between 0 (lowest) and 9 (highest).
Setting
Multicast Volume volume with the
Home Page.
Device Page.
Multicast Volume box, type a number between 0 (lowest) and 9 (highest).
931240M
Installing the SIP Loudspeaker Amplifier (AC-Powered)
SIP Loudspeaker Amplifier (AC-Powered) Setup
Device Page
(Figure 2-30) on the SIP Loudspeaker Amplifier (AC-Powered)
Volume
SPD
PWR Status
SIP Volume setting on the
Multicast Volume
External volume dial
Device Page, complete the
setting on the Device Page,
CyberData Corporation
34