REAR WHEEL, BRAKE DISC, AND REAR WHEEL
SPROCKET
EB701710
INSTALLING THE REAR WHEEL
1. Lubricate:
• w heel axle
• w heel bearings
• oil seal lips
Recommended lubricant
Lithium soap base grease
2. Adjust:
• drive chain slack a
Drive chain slack
40 ~ 50 mm
Refer to " ADJUSTING THE DRIVE
CHAIN SLACK" in chapter 3.
3. Tighten:
• w heel axle nut
• brake caliper bolts
WARNING
WARNING
M ake sure that the brake hose is routed
properly.
EB701900
ADJUSTING THE REAR WHEEL STATIC
BALANCE
NOTE:
• After replacing the tire, w heel or both,
the rear w heel static balance should be
adjusted.
• Adjust the rear w heel static balance
w ith the brake disc and rear w heel
drive hub installed.
1. Adjust:
• rear w heel static balance
Refer to " FRONT WHEEL" .
7 - 15
CHAS
150 Nm (15.0 m · kg)
40 Nm (4.0 m · kg)