3M 3-M Matic Accuglide 4 Instructions And Parts List
  1. Manuals
  2. Brands
  3. 3M Manuals
  4. Food Saver
  5. 3-M Matic Accuglide 4
  6. Instructions and parts list

3M 3-M Matic Accuglide 4 Instructions And Parts List

High performance taping heads 2 and 3 inch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Instructions and Parts List
3M-Matic
Accuglide
High Performance
Taping Heads
2 and 3 Inch
Type 11800
Serial #:
Important Safety Information
BEFORE INSTALLING OR OPERATING THIS EQUIPMENT
Read, understand and follow all safety and operating instructions.
Spare Parts
It is recommended you immediately order the spare parts listed in the "Spare
Parts/Service Information" section. These parts are expected to wear through
normal use, and should be kept on hand to minimize production delays.
3M-Matic
Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800
™
Page i
44-0009-2146-8 / ECO# 0078045
™
4
™
For reference, record machine serial number here.
North American - ENG
Date Released:
05-22-18

Advertisement

Table of Contents
loading

Related Manuals for 3M 3-M Matic Accuglide 4

Summary of Contents for 3M 3-M Matic Accuglide 4

  • Page 1 Instructions and Parts List 3M-Matic ™ Accuglide ™ High Performance Taping Heads 2 and 3 Inch Type 11800 Serial #: For reference, record machine serial number here. Important Safety Information BEFORE INSTALLING OR OPERATING THIS EQUIPMENT Read, understand and follow all safety and operating instructions.
  • Page 2 North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page ii 05-22-18 44-0009-2146-8 / ECO# 0078045...

  • Page 3: Replacement Parts And Service Information

    Replacement Parts and Service Information To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. ™ ™ ® It has been set up and tested in the factory with Scotch Tapes. ® Included with each machine is an Instructions manual.
  • Page 4 North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page iv 05-22-18 44-0009-2146-8 / ECO# 0078045...
  • Page 5 Replacement Parts and Service Information (continued) To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. ™ ™ ® It has been set up and tested in the factory with Scotch tapes. ® Included with each machine is an Instructions Manual.
  • Page 6 North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page vi 05-22-18 44-0009-2146-8 / ECO# 0078045...

  • Page 7: Table Of Contents

    Replacement Parts and Service ......19 North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™...

  • Page 8: Equipment Warranty And Limited Remedy

    3M to its factory or other authorized service station designated by 3M. If 3M is unable to repair or replace the part within a reasonable time after receipt thereof, 3M, at its option, will replace the equipment or refund the purchase price.

  • Page 9: Intended Use

    The compact size and simplicity of the taping head also makes it suitable for mounting in box conveying systems other than 3M-Matic™ case sealers. This includes replacement of other types of taping, gluing or stapling heads in existing case sealing machines.
  • Page 10 North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 2 05-22-18 44-0009-2146-8 / ECO# 0078045...

  • Page 11: Taping Head Contents / How To Use Manual

    (ELV), a glossary with a defi nition of symbols, plus a parts list of the 3M-Matic™ Accuglide 4 (2 and 3 inch) 3M Industrial Adhesives and Tapes Division 3M Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000 (USA) Edition April 2018 / Copyright 3M 2018.

  • Page 12: Important Safeguards

    The blades are extremely sharp. drive system is running (Important Safeguards continued on next page) North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 4...
  • Page 13 See "Replacement Parts Illustrations and Parts Lists" for label part numbers. 34-8720-2917-7 AccuGlide Taping Head 34-8720-2918-5 CAUTION Sharp Knife 78-0025-0308-0 Figure 1-1 Replacement Labels/3M Part Numbers North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 5 05-22-18...

  • Page 14: Specifi Cations

    5. Box Size Capacities: For use with center seam regular slotted containers. When upper and lower taping heads are used on “3M-Matic” case sealers, refer to the respective instruction manual specifi cations for box weight and size capacities. 6. Operating Rate: Conveyor speeds up to 0.76m/s [150fpm] maximum.

  • Page 15: Dimensional Drawing

    3.15 inches [80mm] 14.96 Inches [380mm] M6 3 inch Head: 4 inches [101mm] Figure 2-1 Dimensional Drawing North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 7 05-22-18...

  • Page 16: Installation

    Note: Make sure lock lever is in correct the transportation company and also position during and after loading. notify your 3M Representative. Pushing or pulling a roll of tape while lock is engaged may bend spring lock. Installation Guidelines...

  • Page 17: Operation

    Applying Roller Roller Intermediate Wipe Figure 3-1 Taping Head Components/Threading Diagram - Upper Head North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 9 05-22-18 44-0009-2146-8 / ECO# 0078045...

  • Page 18: Tape Loading - Upper Taping Head

    Applying Roller Tape Loading – Lower Taping Head See upper head instructions. Figure 3-2 Tape Loading/Threading North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 10 05-22-18 44-0009-2146-8 / ECO# 0078045...
  • Page 19 The blades are extremely sharp. (push to release) Figure 3-6 Tape Hub / Mechanism Lock North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 11 05-22-18 44-0009-2146-8 / ECO# 0078045...

  • Page 20: Maintenance

    (maintenance continued on next page.) North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 12...

  • Page 21: Cleaning

    2. Remove roller and wave washer. 3. Mount roller replacement. 4. Replace wave washer and socket head cap screw. North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 13...

  • Page 22: Adjustments

    Figure 5-2 Tape Alignment (adjustments continued on next page.) North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 14...

  • Page 23: Applying Mechanism Spring

    Figure 5-5 Tape Roll Brake (adjustments continued on next page.) North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 15...

  • Page 24: Tape Leg Length

    - Never attempt to work on the taping head or load tape while the box drive system is running. Figure 5-7 Changing Tape Leg Length North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 16...

  • Page 25: Troubleshooting Guide

    If not, press bearing further into roller or replace roller (continued on next page) North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 17...
  • Page 26 Box fl aps not of equal length Adjust centering guides/adjust centering alignment Check box specifi cations North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 18 05-22-18...

  • Page 27: Spare Parts/Service Information

    Information" for replacement parts ordering information. Important – Not all the parts listed are normally stocked items. Contact 3M/Tape Dispenser Parts to confi rm item availability. North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™...
  • Page 28 North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 20 05-22-18 44-0009-2146-8 / ECO# 0078045...
  • Page 29 Arm Assembly Figure 11802 Figure 11806 Cut Off Bracket Blade Arm Cylinder Assembly Assembly North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 21 05-22-18 44-0009-2146-8 / ECO# 0078045...
  • Page 30 Left Hand View Information and for both Figure 11801– Full Assembly 2” and 3” and Little David Taping Head Parts North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released:...
  • Page 31 AccuGlide ™ 4 - 2 and 3” Figure 11801– Full Assembly Ref. No. 3M Part No. Description 11801-1 78-0025-0282-7 Clutch Roller Assembly 2” RH 78-0025-0473-2 Clutch Roller Assembly 2” LH 78-0025-0292-6 Clutch Roller Assembly 3” RH 11801-2 78-0025-0286-8 Roller Assembly 2”...
  • Page 32 Figure 11802 – Frame Hardware Assembly Left Hand View Information and for both 2” and 3” and Little David Taping Head Parts North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released:...
  • Page 33 AccuGlide ™ 4 - 2 and 3” Figure 11802 – Frame Hardware Assembly Ref. No. 3M Part No. Description 11802-1 78-0025-0270-2 Spring - Booster 11802-2 78-0025-0253-8 Wiper Set - Rear 2” 78-0025-0254-6 Wiper Set - Rear 3” 11802-3 78-0025-0253-8 Wiper Set - Middle 2”...
  • Page 34 Figure 11803 – Core Mechanism Assembly Left Hand View Information and for both 2” and 3” and Little David Taping Head Parts North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released:...
  • Page 35 AccuGlide ™ 4 - 2 and 3” Figure 11803 – Core Mechanism Assembly Ref. No. 3M Part No. Description 11803-1 78-0025-0283-5 Roller Arm Assembly - Front 2” RH 78-0025-0515-8 Roller Arm Assembly - Front 2” LH STD 78-0025-0289-2 Roller Arm Assembly - Front 2” RH LD 78-0025-0293-4 Roller Arm Assembly - Front 3”...
  • Page 36 Figure 11804 – Front Roller Arm Assembly Left Hand View Information and for both 2” and 3” and Little David Taping Head Parts North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released:...
  • Page 37 AccuGlide ™ 4 - 2 and 3” Figure 11804 – Front Roller Arm Assembly Ref. No. 3M Part No. Description 11804-1 78-0025-0458-3 Roller Arm - 2” RH 78-0025-0475-7 Roller Arm - 2” LH 78-0025-0464-1 Roller Arm - 2” RH LD 78-0025-0435-1 Roller Arm - Front 3”...
  • Page 38 Figure 11805 – Rear Roller Arm Assembly Left Hand View Information and for both 2” and 3” and Little David Taping Head Parts North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released:...
  • Page 39 AccuGlide ™ 4 - 2 and 3” Figure 11805 – Rear Roller Arm Assemtly Ref. No. 3M Part No. Description 11805-1 78-0025-0438-5 Roller Arm - Rear RH 78-0025-0468-2 Roller Arm - Rear LH 78-0025-0457-5 Roller Arm - Rear RH LD...
  • Page 40 Figure 11806 – Blade Arm Assembly Left Hand View Information and for both 2” and 3” and Little David Taping Head Parts North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released:...
  • Page 41 AccuGlide ™ 4 - 2 and 3” Figure 11806 – Blade Arm Assembly Ref. No. 3M Part No. Description 11806-1 78-0025-0439-3 Cam - Cutting Assembly RH 11806-2 78-0025-0314-8 Guard Assembly - Blade 2” RH 78-0025-0410-4 Guard Assembly - Blade 3” RH...
  • Page 42 7000r-7000r3 HS Pro Reverse View Shown (for Clarity) Figure 11807 – Cut Off Bracket / Cylinder Assembly North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 34 05-22-18...
  • Page 43 7000r-7000r3 HS Pro Figure 11807 – Cut Off Bracket / Cylinder Assembly Ref. No. 3M Part No. Description 11807-1 70-0075-0925-3 Tape Head - AccuGlide 4 - 2” RH 70-0075-1169-7 Tape Head - AccuGlide 4 - 2” LH 70-0075-0927-9 Tape Head - AccuGlide 4 - 3” RH 70-0075-0928-7 Tape Head - AccuGlide 4 - 2”...
  • Page 44 Also see Parts List for all Right and Left Hand View Information and for both 2” and 3” and Little David Taping Head Parts North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released:...
  • Page 45 AccuGlide ™ 4 - 2 and 3” Figure 11808 – Tape Roll Mast Assembly Ref. No. 3M Part No. Description 11808-1 78-0025-0450-0 Mast - Support 11808-2 78-0025-0462-5 Screw - Adjustment 11808-3 78-0025-0275-1 Spring - Conical Hub 11808-4 78-0025-0285-0 Hub - Tape Roller 2”...
  • Page 46 Figure 11809 – Clutch Roller Head Left Hand View Information and for both 2” and 3” and Little David Taping Head Parts North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released:...
  • Page 47 AccuGlide ™ 4 - 2 and 3” Figure 11809 – Clutch Roller Head Ref. No. 3M Part No. Description 11809-1 78-0025-0461-7 Shaft - One Way Clutch Roller 2” 78-0025-0443-5 Shaft - One Way Clutch Roller 3” 11809-2 78-0025-0276-9 Spring - Conical Clutch...
  • Page 48 North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 40 05-22-18 44-0009-2146-8 / ECO# 0078045...
  • Page 49 North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 41 05-22-18 44-0009-2146-8 / ECO# 0078045...
  • Page 50 North American - ENG 3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800 ™ Date Released: Page 42 05-22-18 44-0009-2146-8 / ECO# 0078045...

This manual is also suitable for:

11800

Table of Contents