Taping Head Contents / How To Use Manual - 3M Matic 800at Instructions And Parts List

Taping Head Contents
AccuGlide 2+ STD 2 Inch Upper and Lower Taping Heads consist of:
™
Qty. Part
1
1
1
1
General Information
This instruction manual covers safety aspects, handling and transport, storage, unpacking, preparation, installa-
tion, operation, set-up and adjustments, technical and manufacturing specifi cations, maintenance, troubleshoot-
ing, repair work and servicing, electric diagrams, warranty information, disposal (ELV), a glossary with a defi nition
of symbols, plus a parts list of the 3M-Matic
3M Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000 (USA) Edition May 2010/Copyright 3M 2010. All rights
reserved The manufacturer reserves the right to change the product at any time without notice.
How to use this Manual
The manual is an important part of the machine; all information contained herein is intended to enable the equip-
ment to be maintained in perfect condition and operated safely. Ensure that the manual is available to all opera-
tors of this equipment and the manual is kept up to date with all subsequent amendments. Should the equipment
be sold or disposed of, please ensure that the manual is passed on with the machine.
Electrical and pneumatic diagrams are included in the manual. Equipment using PLC controls and/or electronic
components will include relevant schematics or programs in the enclosure (or will be delivered separately as
needed)
Keep the manual in a clean and dry place near the machine. Do not remove, tear or rewrite parts of the manual
for any reason. Use the manual without damaging it. However, if the manual has been lost or damaged, ask
your after sale service for a new copy (if it is possible, please have the manual name, part number, and revision
information and/or model/machine name, machine type, and serial number) that are
located on the identifi cation plate (For example: Model Accuglide 2+ STD - 2 inch - Type 10500 - Serial Number
13282).
NOTE:
All the important warning notes related to the operation of the machine are identifi ed by the symbol:
Updating the Manual
Modifi cations to the machine are subject to manufacturer's internal procedures. The user may receive pages or parts
of the manual which contain amendment made after its fi rst publication. The user must use them to update this manual.
STD 2" Taping Head
Name
Taping Head Assembly
Tape Drum and Bracket Assembly
Hardware and Spare Parts Kit
Threading Tool
TM
Accuglide 2+ STD - 2 inch 3M Industrial Adhesives and Tapes Division
3
2010 May