Changing Fuel Filters - Iveco VECTOR Series Technical And Repair Manual

VECTOR 8 ENGINES

CHANGING FUEL FILTERS

Handle all parts extremely carefully.
Never get your hands or fingers between pieces.
!
Wear the required safety clothing such as goggles,
gloves, safety shoes and helmet.
NOTE
Before disassembling, place under the filter a basin
of suitable capacity.
Figure 16
Print P2D32V001E
SECTION 3 - INDUSTRIAL APPLICATION
Figure 17
After positioning the tool (1) 99360091 under the filter,
unscrew and remove the filters (3) and (4) with the aid of a
27 mm wrench (2). Hand screw and tighten for another 3/4
turn. Unscrew the air jets nozzle on filters support and pump
on the manual priming pump. Tighten the air jets nozzle
when the fuel go out.
Improper waste disposal is a threat for the
environment. Potentially hazardous waste used on
IVECO vehicles includes lubricants, fuels, coolants,
filters and batteries.
— Use watertight containers when draining off
fluids. Never use containers for foodstuffs or
beverages that can lead people to drink from
them.
— Never throw waste on the ground, on tips or
in water courses.
— Obtain information on the appropriate ways
of recycling or disposing of waste from the
local authorities or collection centres.
91
Base - April 2006