Changing An Injector - Iveco VECTOR Series Technical And Repair Manual

VECTOR 8 ENGINES

CHANGING AN INJECTOR

To change an injector, proceed as illustrated here:
Handle all parts extremely carefully.
!
Never get your hands or fingers between pieces.
Wear the required safety clothing such as goggles,
gloves, safety shoes and helmet
Figure 19
- Disconnect the power supply cables (1).
Figure 20
- Disassemble the pipes (2) on the injector side and on the
flow limiting device side by means of wrench 99368506.
Print P2D32V001E
SECTION 3 - INDUSTRIAL APPLICATION
Figure 21
- Unscrew the cheese-headed screw M10x70 (3)
fastening the fixing bracket (4).
Figure 22
- Now fit on tool 99368505 (5) and, using the specific
wrench, completely remove the injector from its casing.
- Clean the injector seat.
Figure 23
- On completing these operations, fit the injector (7) back
on together with the fixing bracket (6).
93
Base - April 2006