Iveco VECTOR Series Technical And Repair Manual page 142

90
SECTION 3 - INDUSTRIAL APPLICATION
Figure 14
- Apply the 10 — 60 Nm torque wrench with the 3/8"
square connection 99389831 (4) to the wrench
99368503 to lock the lock nut to a torque of 40 Nm.
Figure 15
Base - April 2006
- Adjust the other valves in the order shown on previous
- Now close all 16 covers, extract the tool for turning the
82186
1. Adjuster screw lock nut — 2. Adjuster screw.
page.
flywheel and close the flywheel cover.
Tightening torque 7 ÷ 10 Nm.
VECTOR 8 ENGINES
0,5 mm
0,5 mm
81611
Print P2D32V001E