Iveco VECTOR Series Technical And Repair Manual page 58

6
SECTION 3 - INDUSTRIAL APPLICATION
Figure 4
VECTOR engines feature a 4 stroke diesel cycle with
supercharging with 8 cylinders in two banks at 90˚.
They have high pressure injection fuelling (common rail) and
are entirely electronically driven in order to optimise the
working process in accordance to the operation, limiting as
much as possible the pollution emissions and consumption.
NOTE Data, features and performances are valid only if the
setter fully complies with all the installation
prescriptions provided by Iveco Motors.
Furthermore, the users assembled by the setter
shall always be in conformance to couple, power
and number of turns based on which the engine has
been designed.
Base - April 2006
GRIFFON application
The section herein described is composed or four sections:
- Section of mechanical overhaul prescribed in accordance
to the engine's specific duty, illustrating all necessary
operation to remove and assembly the external
components of the engine, including cylinder heads,
gearbox of the timing system and of the front part cover;
- Electrical section, describing the connections to the
different components of the engine control module and
of the sensors assembled to the engine;
- Diagnosis section;
- Section of preventive maintenance operations, providing
instructions for the execution of the main operations.
VECTOR 8 ENGINES
112310
Print P2D32V001E