84
SECTION 3 - INDUSTRIAL APPLICATION
CHECKING/REFILLING ENGINE OIL
FILTERS
Handle all parts extremely carefully.
Never get your hands or fingers between pieces.
!
Wear the required safety clothing such as goggles,
gloves, safety shoes and helmet.
Every 25,000 km check the level of oil in the sump with the
dipstick.
The level must be between the max and min marks on the
dipstick.
If necessary, top up with oil of the same type contained in the
sump via the filler (Urania Turbo type of oil)
NOTE
When filling, it is recommended to take out the
dipstick to help the oil flow into the sump.
Base - April 2006
CHANGING ENGINE OIL FILTERS
Handle all parts extremely carefully.
!
Never get your hands or fingers between pieces.
Wear the required safety clothing such as goggles,
gloves, safety shoes and helmet.
Before touching the filters, make sure the engine
temperature is not such as to cause burns.
Engine lubricating oil is harmful: avoid contact with
skin and eyes. In the event of contact, wash with
plenty of running water.
To change the engine oil filters, proceed as illustrated here.
Before removing the filters, place a tray of
NOTE
sufficient capacity in a suitable position: each filter
contains approximately 1 kg of engine oil.
Figure 1
To remove the engine oil filters (2) use tool 99368538 (1).
VECTOR 8 ENGINES
83512
Print P2D32V001E