Iveco VECTOR Series Technical And Repair Manual page 2

This publication describes the characteristics, data and correct
methods for repair operations on each component of the ve-
hicle.
If the instructions provided are followed and the specified
equipment is used, correct repair operations in the pro-
grammed time will be ensured, safeguarding against possible
accidents.
Before starting to perform whatever type of repair, ensure that
all accident prevention equipment is available and efficient.
All protections specified by safety regulations, i.e.: goggles,
helmet, gloves, boot, etc. must be checked and worn.
All machining, lifting and conveying equipment should be in-
spected before use.
The data contained in this publication was correct at the time
of going to press but due to possible modifications made by
the Manufacturer for reasons of a technical or commercial na-
ture or for adaptation to the legal requirements of the differ-
ent countries, some changes may have occurred.
No part of this publication, including the pictures, may be re-
produced in any form or by any means.
Publication edited by
Iveco Motors
Iveco SpA
PowerTrain
Mkt. Advertising & Promotion
Viale dell'Industria, 15/17
20010 Pregnana Milanese
Milano (Italy)
st
Print P2D32V001E - 1 Ed. 04.2006
Produced by:
B.U. TECHNICAL PUBLISHING
Iveco Technical Publications
Lungo Stura Lazio, 15/19
10156 Turin - Italy