Changing Fuel Prefilter And Water Separator Filter - Iveco VECTOR Series Technical And Repair Manual

VECTOR 8 ENGINES
CHANGING FUEL PREFILTER AND
WATER SEPARATOR FILTER
Handle all parts extremely carefully.
!
Never get your hands or fingers between pieces.
Wear the required safety clothing such as goggles,
gloves, safety shoes and helmet.
To change the fuel pre—filter and water separator filter,
proceed as illustrated here.
NOTE Before disassembling, place under the filter a basin
of suitable capacity.
Figure 3
- Remove the connector (3) for indicating water in the
fuel filter by acting on the locking piston (4).
Figure 4
- Turn the screw (1) and separate the connecting head (2)
from the filter casing (3).
- If the condensate drain operation is carried out, retighten
the screw plug as soon as the fuel begins to emerge.
- If you need to change the filter, fully drain the diesel in
the filter cartridge and separate component (2) from
filter cartridge (3).
Print P2D32V001E
Figure 5
- After positioning the tool 99360076 under the filter,
unscrew and remove the filter (1) with the aid of a 27
mm wrench (2).
Improper waste disposal is a threat for the
environment. Potentially hazardous waste used on
IVECO vehicles includes lubricants, fuels, coolants,
filters and batteries.
— Use watertight containers when draining off
fluids. Never use containers for foodstuffs or
83488
beverages that can lead people to drink from
them.
— Never throw waste on the ground, on tips or
in water courses.
— Obtain information on the appropriate ways
of recycling or disposing of waste from the
local authorities or collection centres.
Hand screw and tighten for another 3/4 turn.
83487
SECTION 3 - INDUSTRIAL APPLICATION
87
83486
Base - April 2006