Interfaces; Overview Of Interfaces - Siemens SIMOTION D410 PN Manual

Interfaces

3.1

Overview of interfaces

This chapter describes the SIMOTION D410 interfaces.
Available interfaces
Table 3- 1
Interface
Digital inputs
Digital inputs/outputs
DRIVE-CLiQ interface
PROFIBUS DP interface
(SIMOTION D410 DP only)
PROFINET interface
(SIMOTION D410 PN only)
Power Module Interface
Encoder interface (HTL / TTL / SSI)
EP terminals/temperature sensor connection
Power supply connection
Measuring sockets
Non-usable interfaces
Table 3- 2
Interface
RS232 serial interface
Interface for BOP20
See also
SIMOTION D410 DP display (Page 19)
SIMOTION D410 PN display (Page 22)
SIMOTION D410
Manual, 02/2012
Overview of available SIMOTION D410 interfaces
Overview of non-usable SIMOTION D410 interfaces
Designation Connector type
X121 Mini Combicon, 12-pin
X121 Mini Combicon, 12-pin
X100 DRIVE-CLiQ connector
X21 9-pin SUB-D socket
X200 and X201 8-pin RJ45 socket
PM-IF 8-pin direct connector
X23 15-pin SUB-D socket
X120 Mini Combicon, 8-pin
X124 Combicon 4-pin
T0, T1, T2 and G Sockets
Designation Connector type
X22 9-pin SUB-D socket
X142 8-pin multipoint connector
3
33