Siemens SIMOTION D410 PN Manual page 14

Description
1.2 System components
Table 1- 1
Component
SIMOTION D410
System software
Power supply (PS)
PROFIBUS DP
SIMOTION D410 DP can communicate via PROFIBUS DP interface to the following
components:
Table 1- 2
Component
Programming device (PG/PC) ... configures, sets parameters, programs and tests using the
SIMATIC HMI device
Drive units with
PROFIBUS DP interface (e.g.
CU310 DP)
Other controllers (e.g.
SIMOTION or SIMATIC)
Distributed I/O systems
SIMATIC ET 200M
14
System components
Function
... is the central motion control module.
The module contains the programmable SIMOTION Runtime in
SIMOTION D410 and the SINAMICS S120 drive software.
You can use the integrated rapid digital I/Os as:
Homing inputs
•
Inputs for measuring inputs
•
User-addressable process I/Os
•
Outputs for fast output cams
•
The measuring sockets can output any analog signals.
The DRIVE-CLiQ interface permits a fast connection to the SINAMICS drive
components.
The system software is delivered separately on a CompactFlash Card (not
included in the scope of delivery).
Note:
An additional license is not required for the real axis technology.
... provides the electronic power supply for SIMOTION D410 (e.g., SITOP
power supply).
Note:
If the SIMOTION D410 is snapped on to a PM340 Power Module, the Power
Module may be used as the sole method of supplying power to the
SIMOTION D410 in certain cases (e.g. when digital outputs are not used, etc.
. .). Also refer to the Power supply section in the SIMOTION D410 Manual.
Components on the PROFIBUS DP
Function
SIMOTION SCOUT Engineering System (ES).
... is used for operator control and monitoring functions. It is not
absolutely essential for running SIMOTION D410.
... convert speed setpoints into signals for controlling the motor and
supply the power required to operate the motors.
Can also be operated as an isochronous, equidistant Slave on the
PROFIBUS DP.
Modular I/O system for control cabinet installation and high channel
densities.
SIMOTION D410
Manual, 02/2012