Interface assignments
Table 3- 17
Interface X124
View
Pin
+
+
G
G
Note
When using external power supplies, e.g., SITOP, the ground potential must be connected
with the protective ground terminal (PELV).
See also
Connecting the power supply (Page 67)
3.9
Measuring sockets
Interface features
The T0 - T2 measuring sockets are used to output analog signals Any interconnectable
signal can be output to any measuring socket on the control unit.
Note
The measuring sockets are suited for multiple-spring wire connectors with a diameter of
2 mm.
SIMOTION D410
Manual, 02/2012
Description
Electronic power supply
Electronic power supply
Electronic ground
Electronic ground
Technical details
Voltage: 24 VDC (20.4 V - 28.8 V)
Current consumption: max. 0.8 A (without DRIVE-CLiQ and
digital outputs)
max. current via the bridges in the connector: 10 A at 55 °C
Interfaces
3.9 Measuring sockets
51