4.4
Mounting SIMOTION D410 in the Power Module Chassis
Figure 4-3
The DRIVE-CLiQ cable and the cable for the 24 V supply must be correctly routed so that
the front flap can close.
Note
For the Power Module, a connecting cable is also supplied for the power supply of the D410.
Customers must connect-up this cable.
This means that the D410 no longer has to be supplied from an external 24 V DC.
SIMOTION D410
Manual, 02/2012
4.4 Mounting SIMOTION D410 in the Power Module Chassis
Mounting the CU310, for example, in the Power Module Chassis, FX frame size
Assembling
57