Introduction; Purpose Of The Design Guide; Additional Resources; Abbreviations And Conventions - Danfoss VLT ISD 510 Design Manual

Introduction

1 Introduction

1.1 Purpose of the Design Guide

This design guide for Danfoss VLT
®
ISD 510 System is intended for:
•
Project and systems engineers.
•
Design consultants.
•
Application and product specialists.
The design guide provides technical information to
understand the capabilities of the VLT
®
Drive ISD 510 System, and to provide design consider-
ations and planning data for integration of the system into
an application.
Also included are:
•
Safety features.
•
Fault condition monitoring.
•
Operational status reporting.
•
Serial communication capabilities.
•
Programmable options and features.
Design details, such as site requirements, cables, fuses,
control wiring, the size and weight of units, and other
important information necessary to plan for system
integration are also provided.
The design guide caters for the selection of ISD 510 servo
system components and options for a diversity of
applications and installations. Reviewing the detailed
product information in the design stage enables the
development of a well-conceived system with optimal
functionality and efficiency.

1.2 Additional Resources

Available manuals for the VLT
®
ISD 510 System:
Manual Contents
® Information about the installation,
VLT Integrated Servo Drive
commissioning, and operation of
®
ISD 510 System Operating
the ISD 510 servo system.
Instructions
® Information about the set-up of
VLT Integrated Servo Drive
the ISD 510 servo system and
®
ISD 510 System Design
detailed technical data.
Guide
® Information about the
VLT Integrated Servo Drive
programming of the ISD 510 servo
®
ISD 510 System
system.
Programming Guide
Table 1.1 Available Manuals for the ISD 510 Servo System
MG36C102
Design Guide
®
Integrated Servo Drive
®
Integrated Servo
®
Integrated Servo Drive
Danfoss A/S © 08/2017 All rights reserved.
Technical literature for Danfoss drives is also available
online at drives.danfoss.com/knowledge-center/technical-
documentation/.

1.3 Abbreviations and Conventions

1.3.1 Abbreviations

All abbreviations can be found in chapter 7.1 Glossary.

1.3.2 Conventions

Numbered lists indicate procedures.
Bullet lists indicate other information and descriptions of
figures.
Italicized text indicates:
•
Cross-reference.
•
Link.
•
Footnote.
•
Parameter name, parameter group name,
parameter option.
All dimensions in drawings are in mm (inch).

1.4 Copyright

® ® ®
VLT , ISD , and SAB are Danfoss registered trademarks.

1.5 Approvals and Certifications

®
The VLT Integrated Servo Drive ISD
the standards listed in Table 1.2.
IEC/EN 61800-3 Adjustable speed electrical power drive
systems.
Part 3: EMC requirements and specific test
methods.
IEC/EN 61800-5-1 Adjustable speed electrical power drive
systems.
Part 5-1: Safety requirements – Electrical,
thermal, and energy.
IEC/EN 61800-5-2 Adjustable speed electrical power drive
systems.
Part 5-2: Safety requirements – Functional.
IEC/EN 61508 Functional safety of electrical/electronical/
programmable electronic safety-related
systems.
EN ISO 13849-1 Safety of machinery – Safety-related parts of
control systems.
Part 1: General principles for design.
EN ISO 13849-2 Safety of machinery – Safety-related parts of
control systems.
Part 2: Validation.
®
510 System fulfills
7
1 1