Ethernet Connectors; Aux Connectors; 24/48 V In Connector; Udc Connectors - Danfoss VLT ISD 510 Design Manual

Specifications

6.2.3.6 Ethernet Connectors

Connector Description
name
Ethernet X1 Connection to
fieldbus
Ethernet X2 Connection to
fieldbus
Ethernet X3 Connection to
servo line 1
Ethernet X4 Connection to
servo line 2
Table 6.20 Ethernet Connectors
6 6
NOTICE
The maximum length of the X1 and X2 shielded Ethernet
cables is 30 m.

6.2.3.7 AUX Connectors

Connector Description
name
ISD Line 1: Used to connect
AUX 1 the AUX output
from the SAB to
ISD Line 2:
the hybrid cable.
AUX 2
Table 6.21 AUX Connectors

6.2.3.8 24/48 V IN Connector

Connector Description
name
24/48 V IN Used for 24–
Connector 48 V DC input
to the SAB.
Table 6.22 24/48 V IN Connector
72
®
VLT Integrated Servo Drive ISD
Drawing/pins Ratings
Fulfill the
1
100BASE-T
8
specification
Pins:
1: TD+
2: TD–
3: RD+
6: RD–
Drawing/ Ratings
pins
Nominal voltage:
+ AUX –
24–48 V DC±10%
Nominal current:
Depends on the
Pins (left to
number of servo
right):
drives in the
AUX+
application
AUX–
Maximum current:
15 A
Maximum cross-
2
section: 2.5 mm
Drawing/ Ratings
pins
Nominal voltage: 24–
+ AUX –
48 V DC ±10%
Nominal current:
Depends on the
Pins (left to
number of servo
right):
drives in the
AUX+
application
AUX–
Maximum current:
34 A
Maximum cross-
section:
4 mm 2
Danfoss A/S © 08/2017 All rights reserved.
®
510 System
NOTICE
The maximum cable length is 3 m.

6.2.3.9 UDC Connectors

Connector Description
name
ISD Line 1: Used to connect
UDC 1 the DC-link
voltage from the
ISD Line 2:
SAB to the
UDC 2
hybrid cable.
Table 6.23 UDC Connectors

6.2.3.10 Hybrid Cable PE

Item Description
Hybrid Used to connect the
cable PE PE wire from the
hybrid cable to the
decoupling plate.
Table 6.24 Hybrid Cable PE
Drawing/ Ratings
pins
Nominal voltage:
+ UDC –
565–778 V DC
Nominal current:
Depends on the
Pins (left to
number of servo
right):
drives in the
UDC+
application
UDC–
Maximum current:
15 A
Maximum cross-
section:
2.5 mm 2
Drawing/pins Ratings
See callout 15 in Maximum
Illustration 6.30. cross-
section:
2.5 mm 2
MG36C102