Operating Conditions - Weber Markoprint XB4JET Manual For Installation, Operation And Maintenance

Technical data
Supply voltage
The switching threshold of the inputs is 12V ± 2V.
The sensors / encoders must be designed for 24V operating voltage. E.g. 24V + - 10%
or 10V – 30V
The inputs are NPN as standard, but can be switched to PNP with the iDesign software.

Operating conditions

Environment
Duration
Specification
Temperature range
Relative humidity, maximum
(non-condensing)
Specification
Maximum operating time
Seite 21 von 162
72800153 Markoprint XB4JET / XB8JET
Value
5 to 45
10 to 90
Value
The device is
continuous operating.
Unit
°C
%
designed for
GB