Encoder - Weber Markoprint XB4JET Manual For Installation, Operation And Maintenance

Appendix

Encoder

Encoder input: 24V
Standard: NPN or push-pull max. 100 kHz
Rotary encoder with 4-pole M8 round plug
If using a PNP encoder or a PNP Signal as encoder the encoder input must be pulled to
GND with an 1KOhm resistor.
The resistor must be for min.1W and the load is about 25mA.
Cable colours
When using the splitter cable are both inputs / outputs clearly separated.
The output is on a socket on PIN4 (see Fig.45).
PIN Description
1 Power, max. 10mA
2
3 GND
4 Encoder signal
Seite 129 von 162
72800153 Markoprint XB4JET / XB8JET
Value
+ 24
0
Standard: NPN or push-
pull
View on plug back side
PIN 4 BK (black)
PIN 3 BU
(blue)
Unit
V
V
-
PIN 2 WH (white)
PIN 1 BN (brown)
Fig. 44: Socket 4-pole M8 plug
PIN Cable colour
1 Brown 24V
White input
2
Blue 0V (ground)
3
Black input
6
GB