Configurable Inputs And Outputs - Weber Markoprint XB4JET Manual For Installation, Operation And Maintenance

Operation

Configurable Inputs and Outputs

The Markoprint XB4JET/XB8JET controller offers the possibility of the M12 (ALARM)
and the 15-pin SUB-D connector (EXTERNAL) to use as additional inputs / outputs. The
used pins of the pin assignment see page 128 for further details.
A variety of configurations are possible and so the connectors for output of status
messages (OK, Warning, Error), cartridge level messages (5% low / empty), print ready
and print pulse are possible to use. On the input side signals for heating, spitting, print
direction, upside print, stop and text selection are possible.
The setting can be done with iDesign Software in System Settings features  Advanced
Settings  Config Input / Output
72800153 Markoprint XB4JET / XB8JET
Seite 96 von 162
Abb. 42: Desktop surface of iDesign
GB