Alarm Connector Alarm1+2 / 5+6; Alarm Connector Alarm3+4 / 7+8 - Weber Markoprint XB4JET Manual For Installation, Operation And Maintenance

Appendix

Alarm connector Alarm1+2 / 5+6

The alarm light (24V) will be connected to the 8-pole M12-socket.
24V voltage will be switched on the outputs. (max.100mA)
The 4 outputs are available as additional potential-free relay output for the alarm output.

Alarm connector Alarm3+4 / 7+8

The alarm light (24V) will be connected to the 8-pole M12-socket.
24V voltage will be switched on the outputs. (max.100mA)
The 4 outputs are available as additional potential-free relay output for the alarm output.
The outputs 1 and 3 are inverse in the basic configuration. (1=green and 3=red are
changed).
If required the setting can changed in „Advanced Settings".
PIN Color
1 – Out1
White
2 – Out2
Brown
3 – Out3
Green
4 – Out4
Yellow
5 – In 4
Grey
6 – In 8
Rose
7 -
8 - GND Red
PIN Color
1 – Out5
White
2 – Out6
Brown
3 – Out7
Green
4 – Out8
Yellow
5 – In 3
Grey
6 – In 7
Rose
7 - +24V
8 - GND Red
Seite 131 von 162
72800153 Markoprint XB4JET / XB8JET
Function
Alarm red lamp
Warning orange lamp
OK green lamp
Reserve
Reserve not connected
see page 136
Reserve not connected
see page 136
common contact
Function
Alarm red lamp
Warning orange lamp
OK green lamp
Reserve
Reserve
Reserve
Power max. 100mA
common contact
GB