List Of Accessories And Spare Parts; Hp Ink Cartridges - Weber Markoprint XB4JET Manual For Installation, Operation And Maintenance

List of accessories and spare parts

List of accessories and spare parts
Procure spare parts via contracted dealers or directly from the manufacturer.

HP Ink cartridges

The specified drying times can be reduced by additional heat treatment (hot-air
blower, IR heater). The open time can be extended by spit pulse programming.
Please note the ink specific settings for head voltage, fire time, spitting and warming.
There is the possibility to set up the ideally standard values for the respective ink type
with the iDesign software or the Web interface.
It makes sense to change the values carefully depending on the application.
After the insertion of a new cartridge the ink counter must be reset and the
temperature measurement must be calibrated. See in the manual of iDesign
software.
The settings can be made with the iDesign software below Functions / System
settings / Advanced settings.
Safety hazard due to incorrect spare parts!
Incorrect or faulty spare parts may affect safety and
cause damage, malfunctions or failure.
Therefore:
–
Only use original spare parts from the manufacturer.
Material damage can be caused by spraying ink!
Spitting results in increased ink consumption and can
lead to undesirable contamination of the environment.
Therefore:
Hold an absorbent cloth in front of the nozzle plate of the
ink cartridge.
Seite 116 von 162
72800153 Markoprint XB4JET / XB8JET
GB